The Glassiled concept can be customized in terms of LED position, colour, number of LED's and the way the product is controlled (remote control, ON/OFF switch, dimmer). We have defined some standard LED positions, especially for shelves but if you have a specific design in mind, do not hesitate to contact your AGC contact person.

Yes, you can use a laminated product, e.g. a Stratobel can be used in combination with a Glassiled product.

Yes, this is possible. The LOW E glass is facing the outside of the building (Associated Glass). The Glassiled laminated assembly is facing the inside of the building as can be seen in the following sketch.

We are able to handle a lot of different LED patterns. Please get in touch with your local AGC contact person to check the compatibility of your own design.

The standard glass shape is rectangular and shapes with at least 2 rectangular angles on the same side are considered as being rectangular. Other shapes (e.g. circular) are also possible but need technical approval.

Yes, it is possible to include a tempered glass as part of a Glassiled product. However, it has little or no added value because Glassiled is a laminated glass and as such a safety product. Any request for a tempered glass will have to be approved by our technical team.

Please contact your local AGC contact person if you require more info.

This depends on where you want to use Glassiled in your bathroom or kitchen.

• Glassiled-Shelves, Glassiled-Showcases, Glassiled-Partitions: no use in volume 1 as a standard volume. Please contact your local AGC contact person for any specific development.
• Glassiled-Glassiled-Shelves, Glassiled-Showcases, Glassiled-Partitions (< 60 Volts): standard product can be used without restriction in Zone 3. If the connectors are insulated, it can also be used in Zone 2.